Tuesday 18 January 2011

Flattracker Build - Fuel Tank


Been spending some time in the garage working on the flattracker the last few weekends. Managed to get the tank all sorted.

Tank mounts - done.

After cutting and shutting the tank, I sealed it with Petseal. But what a dumbass - I plugged the fuel-tap holes with paper... which of course soaked up the petseal and cured hard.

Drill them out...

Rethread...

... but this time not for fuel-taps... I had a plan...

A lick of primer on the underside...

Aluminium (heat reflective... more bhp!) paint underneath and a dab of black on the front bits that can be seen to keep with the blacked-outness (?)...

... and instead of 2 fuel taps, a couple of neat banjos leading to dry-breaks. I can have the tank off in about 15 seconds now with no bother: a 13mm nut and a hex bolt, two dry breaks (spring-loaded so it's a one handed affair!) and the tank just lifts off. It's garage tested and all is sweet. A pukka race machine!

2 comments: